+44 (0)28 37511911

Our team using one of our Ditch Witch JT30 Horizontal Directional Drills installed 1300 metres of a 125mm MP gas main. The installation included a dual carriageway crossing.

Our team installed 160mm pumping sewer at a distance of 360 meters along a road verge and under a busy roundabout. Works were carried out on behalf of Maypine Civils for the client Bellway Homes.

GMAC Utilities used our JT30 drill to install a 315 pe gas main to supply 12 V16 Engines at the Green Frog power station.

The Engines burn gas to generate a 12Mw capacity of power to help support the national grid.

One of our teams installed 118 metres of 90mm PE in Redditch, Worchestershire.

Our objective to drill in a 63mm and 160mm PE pipe across two fairways and a public road crossing with the minimum disruption to the golf course. The purpose of the pipes was to provide a water supply for the new irrigation sprinkler watering system. The work was carried out on behalf of Arden Lea Irrigation and the Client Pyle & Kenfig Golf Course.


Our objective was to drill two 48 metre long 250mm PE pipes to be used as a gravity drain from the lake to a stream. The two pipes were to run side by side, under a large mound with a depth of 9 metres and containing a water main. Our team completed our task successfully using our JT30 machine and the lake now drains into the stream naturally without the use of an expensive diesel pump. With the help of the new drain to maintain the level of the lake this old gravel quarry is on its way back to a nature reserve. This project was carried out for our client Tarmac a CRH company.

GMAC Utilities objective was the installation of a 3 metre deep 180mm PE gravity foul sewer between two houses in Cheltenham. Due to the sandy soil structure, the sewer could not be installed using an open cut method as the risk of trench collapse and damage to the foundation was to high. The sewer was successfully installed using the JT30 Directional Drill. The works carried out on behalf of sub contractor Renlec Groundwork and the client Charles Church.

Horizontal Drilling of a new 180mm Gas main in Runcorn, near Liverpool city.

Work carried out on behalf of the client GTC.

Due to the ever increasing demand for our services we have increased our fleet with two new Horizontal Directional Drills. We've had continued success with the performance of our Ditch Witch machines that we have added a new JT30 to our fleet. Also due to the demand for larger installations of pipe, we have added the new JT60. This allows us to provide a drilling solution for multiple service pipes with diameters ranging from 20mm to 750mm with ease.

GMAC Utilities Limited used directional drilling to install 120 mtrs. of 250 mp gas main pipe for a V16 engine plant for Green Frog Power.

This facility burns gas to make electricity to put back into the grid to help power Bridgewater in Somerset.


Constructionline Gold Member Gmac Utilities Ltd has been assessed and has met the bronze level
requirements of the Fleet Operator Recognition Scheme
(FORS). GMAC Utilities Ltd Has achieved the following standards through assessment for Safety, Health,
Environmental & Quality practices and procedures as a registered supplier on Verify
Category B2

Gmac Utilities are currently working towards ISO accreditation